Current Inventory
McDonough Manufacturing offers a rotating inventory of rebuilt and used sawmill machinery, fully inspected, tested, and backed by the same one-year warranty we provide on new equipment. Whether you're looking for a cost-effective solution, a short lead time, or a proven machine that’s ready to work, we have you covered.
Why Choose Rebuilt?
Rebuilt machinery from McDonough isn’t just used—it’s refurbished to our factory standards. Each system goes through a full teardown, inspection, and rebuild process by our experienced technicians. Any worn components are replaced, all tolerances are reset, and performance is verified through testing.
You receive a machine that looks and performs like new, at a fraction of the price and lead time.
Rebuilt equipment can often be shipped faster than new builds, making it an ideal solution for operations needing to:
-
Replace a machine quickly
-
Expand capacity during peak season
-
Maintain production during new equipment lead times
All rebuilt equipment is supported by our engineering team and parts department, just like new machinery.
McDonough Inventory
1977 McDonough A Series Horizontal
This Resaw was originally built in 1977 with 10” wide x 32’6” long saw blades, Left Hand, Air Strain.
Fully rebuilt Resaw with a 1 year warranty, comes complete with brand new 24” wide Feedworks Table and Hold Down Rolls.
Year: 1977
Make: McDonough
Model: A Series Horizontal
Price: $248,420
Equipment Location: Eau Claire, WI
1995 McDonough 54" Center Split Resaw
2 available
This Resaw was originally built in 1995. Left Hand, 6 1/4" wide Wheels for 7" wide x 26' long bandsaws. Air Strain, Pressure Guides, 4 Roll Hydraulically driven Feedworks, Top Wheel Guard, and 60HP Motor and Drive package. Top and Lower Wheels will have new Wheel Bearings installed. Wheels will be resurfaced, balanced and painted. 4 Roll hydraulically driven Feedworks with 12" Roll opening outside the sawline and 6" Roll opening inside the sawline. Once rebuilt, this Resaw will come with a same-as-new 1 year warranty.
Year: 1995
Make: McDonough
Model: 54" Center Split Resaw
Price: $145,000 USD
Equipment Location: Eau Claire, WI
1988 McDonough 54" Center Split Resaw
This Resaw was originally built in 1988. Left Hand, 6 1/4" wide Wheels for 7" wide bandsaws. Air Strain, Pressure Guides, 4 Roll Hydraulically driven Feedworks, Top Wheel Guard, Sawdust Pan Kit. Top and Lower Wheels will have new Wheel Bearings installed, balanced and painted. Once rebuilt, this Resaw will come with a same-as-new 1 year warranty.
Year: 1988
Make: McDonough
Model: 54" Center Split Resaw
Price: $139,000 USD
Equipment Location: Eau Claire, WI
1995 Standard Duty Linebar
Originally built in 1995. 2 press rolls, 14" press roll opening, 12" fence opening. Once this Linebar is fully rebuilt by the McDonough factory, new components will be installed on anything that is worn, obsolete or broken. This Linebar will carry a same-as-new 1 year warranty. Servo Setworks package available.
2001 McDonough 42inch 3 Knee Carriage
Pantograph, UHMW Cant Kickers, Brownsville Turners on each Knee. Needs to be rebuilt and will come with a 1 year warranty (same as new).
.jpg?width=635&height=423&name=IMG_Used%20Turnbull%20Carriage%20(4).jpg "IMG_Used Turnbull Carriage (4)")
.jpg?width=635&height=423&name=IMG_Used%20Turnbull%20Carriage%20(2).jpg "IMG_Used Turnbull Carriage (2)")
Thinking of Selling or Rebuilding Your Equipment?
McDonough also buys used machinery and can fully rebuild your current equipment to factory standards. If you have a McDonough machine in need of refurbishment, we’ll restore it for a fraction of the cost of new and give it another generation of production life.